Reference: PLLLOS495P

Brand: PrimaluceLAB

Losmandy style dovetail plate 495mm PLUS - PrimaluceLAB

Dovetail Barre Losmandy 495mm

Reference: NX53653

Brand: Omegon

Dovetail Vixen 335 mm - Omegon

A simple 335 mm dovetail to be fixed on telescope rings for its maintenance on a mount. This dovetail is of the VIXEN type, adaptable to most frames.

Reference: KE325

Brand: Kepler

Wide female dovetail Kepler type Vixen double tightening

To adapt an instrument with a dovetail type Vixen     A very robust female dovetail with double clamping     The screws are fitted with a bit to protect the male dovetail     Many holes

Reference: PLLANSU150P

Brand: PrimaluceLAB

150mm support rings - PrimaluceLAB

The 150mm PLUS support rings are designed to be used with Ø150mm tube refractor telescope (or other telescopes brands with tube approximately 150mm in diameter) to expand the possibilities of use

Reference: PLLANSU131P

Brand: PrimaluceLAB

131mm support rings - PrimaluceLAB

The 125mm PLUS support rings are designed to be used with Ø131mm tube refractor telescope (or other telescopes brands with tube approximately 131mm in diameter) to expand the possibilities of use

Reference: 30A060

Brand: Geoptik

Vixen/EQ dovetail 340mm - GEOPTIK

Vixen/EQ dovetail 340mm - GEOPTIK

Reference: PLLMORVLPM

Brand: PrimaluceLAB

Dovetail Clamp Vixen+Losmandy PLUS - PrimaluceLAB

The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates

Reference: PLLSPES10

Brand: PrimaluceLAB

Spacer 10mm - PrimaluceLAB

Reference: PLLVIX350P

Brand: PrimaluceLAB

Vixen style dovetail plate 350mm

The Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp

Reference: doppel3z

Brand: TSOptics

ide-by-side Mounting Plate Losmandy Style for parallel Mounting

This dual mount from Teleskop-Service allows the installation of two instruments om one mount at the same time.  Suitable for mounts with Losmandy, EQ6, EQ8, ... style quick release  Connections at the telescope side - two Losmandy style saddle plates, suitable for telescopes up to 40 kg  Distance between the saddle plate centers - 260 mm (from...

Reference: PLLLOS240P

Brand: PrimaluceLAB

Losmandy style dovetail plate 240mm PLUS - PrimaluceLAB

Dovetail Barre Losmandy 240mm

Reference: PLLVIX90P

Brand: PrimaluceLAB

Vixen style dovetail plate 90mm

The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp

Reference: KE380

Brand: Kepler

Dovetail Losmandy 180mm - TSOPTICS

A 177mm Losmandy type dovetail, equipped with several threaded holes for various uses

Reference: PLLANSU90P

Brand: PrimaluceLAB

90mm support rings - PrimaluceLAB

The 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings.

Reference: KE326

Brand: Kepler

Wide female dovetail Kepler type Losmandy double tightening

To adapt an instrument with a dovetail type Vixen     A very robust female dovetail with double clamping     The screws are fitted with a bit to protect the male dovetail     Many holes

Reference: PLLSAG925

Brand: PrimaluceLAB

Curved blocks for C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" - PRIMALUCELAB

If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...