V2 Motor Tuning Kit (Universal)
Focus your telescope accurately and quickly using our powerful V2 motor focuser kit. This 0.06 degree high resolution box can easily lift over 6 kg (per cm).
Its high torque is suitable for heavy imaging equipment. Additionally, the motor gearbox has low backlash which can easily be adjusted using backlash compensation in the imaging software.
The RJ45 socket can be converted to a Robofocus type serial port easily.
Universal L-shape bracket (black anodizing)
A rigid L-shaped black anodized aluminum bracket has cut rails and can be attached to a wide range of focusers. this support has been successfully tested on the following eyepiece holders:
- Baader Diamond Steel Track
- Baader Steel Track
- Explore Scientific Official
- Moonlite Focusers
- SkyWatcher SPIRIT Official Series
- Starlight FeatherTouch Series
- Stellarvue Fertiers
- reliable takahashi
- Vixen ed81s
- William Optics GT71
- William Optics Redcat
- ... and others
Delivered in this Kit
- High resolution motofocus (7.5 stage, 120 DEG, 1:120 gear ratio).
- Universal black anodized aluminum L-bracket
- 6 x Solid Motor Couplers (3mm to 8mm)
- Different sizes (pairs of m3x10, m4x10, m4x30, m5x10, m6x10) of metric screws and washers
- Four M3x6mm length screws
How to use this Motofocus?
This Focus motorcycle can only be controlled through 2 solutions:
- By the Ultimate Power Box
- By external controller
The advantage over its USB version is that this motor receives its power and control via a single cable, unlike the USB version which must be connected to a 12V power supply in addition to its USB port and probe.
Thus it is the ultimate power box which will provide the power and the orders of movements by the ticket of a computer. Less cable!
This Moto focus can also be used without the powerbox but it will need to be paired with an additional external controller.
✅ We recommend this Motofocus for pure imager systems in addition to the solution with the ultimate powerbox!
✅ Software and driver download: https://pegasusastro.com/support/
Technical specifications
- Pitch angle (DEG) 7.5 / 120 = 0.0625.
- 5755 steps per rotation circle
- Gearbox Reduction Rate = 0.06255 DEG
- 5755 steps per rotation circle. (In full step)
- approximately 1 micron per step (in half drive step)
- Very low reaction (about 30 steps in half step)
- Gear Ratio 1:120
- 4 phases (unipolar motor)
- Voltage 12V DC
- Current (a) 0.27
- Mining Rate (PPS) 400
- Pulling torque (N.cm) 60 (100pps)
- MOTOR STEPER WEIGHT, FABRÉ UNIVERSAL ADAPTER AND Motor coupler weight in total 350G
